Immersion Dip Cooler (ponorný chladič)

This more powerful refrigeration Immersion Cooler, with no temperature control, is designed to be used in conjunction with any stirred or circulating water bath providing constant counter cooling. Its is also an ideal instrument for a variety of cooling applications, suiting an immersion cooling coil.

With an operating range from ambient to -20°C and its additional operating performance over the DC1-300 makes it particularly beneficial at these lower liquid temperatures especially in elevated ambient temperatures or larger volume stirred or circulating water baths.

This model features a flexible 900mm long stainless steel pipe with a protective outer shield, exiting from top of the unit, making the stainless steel cooling coil naturally stand in the corner of any Clifton NE4 Stirred or Circulating water bath. This maximises the working area within the bath and reduces the chance of ‘cold shock’, a chance of the freezing cold coil accidentally intruding or touching and spoiling work. The stainless steel immersion coil is corrosion resistant.

The immersion cooler runs continuously providing counter cooling with a Clifton NE4 Stirred or Circulating water bath providing temperature control.

The unit is fitted with casters, which can be locked when sited, for easy mobility. Suitable for bench top or under-bench use or as a dedicated workstation with a NE4 Stirred or Circulating water bath, 8 or 14 litre sizes, running on top saving bench space.

The DC2-300 replaces wasteful use of cold water-cooling, uses R134a gas and is quiet in operation.

Construction

• Body being durable construction with powder paint finish having good chemical and detergent resistance.
• Now featuring an “Anti-bacterial paint finish” that inhibits the growth of bacteria - more details in "Features and Benefits" below.
• Featuring easy to "wipe clean" control panel also featuring good chemical and detergent resistance.

• 0°C - 60 mins
• -15°C - 120 mins
• -20°C - 140 mins

1. Cool down times are stated from ambient using 100% glycol or Lab Bath solution in a NE4-8D Stirred water bath.

2.Heat up times are stated from ambient 20°C.

3. It is recommended that to achieve optimum performance the bath should be covered with a SL lid.

4. All temperature measurements and performance claims have been carried out in ambient temperature 20°C and installed correctly with adequate ventilation.

5. Cool down and heat up times above are based on performance data recording change in bath liquid temperature.

1. Compressor motor protected by a safety cut out.2. Lockable caster wheels.3. IP rated clear booted on/off mains switch preventing ingress of moisture.

Class 1 - temperature protection

Cooling coil manufactured from high quality 316 stainless steel

3 Years

1. The cooler runs continuously providing reliable and constant cooling capacity.

2. The coil diameter 65mm fitted on end of a 900mm long flexible cooling line.

3.Class leading Cooling Power: 10°C = 1400W, 0°C = 1000W, -10°C = 700W, -20°C = 450W.

4. Normal operating performance, working ambient temperature range 10°C > 25°C. Where ambient temperature range 25°C + this degrades cooling performance. For optimum cooling performance reduce the effect of high ambient temperatures.

5. Use with a minimum distance of 40cm of free air around ventilation slots. DO NOT obstruct. The Immersion Dip Cooler is air cooled with air from its surroundings sucked in at the front and warm air expelled out of the rear. To provide good air circulation and operating performance keep the ventilation slots free from obstruction.

6. To achieve optimum performance any NE4 Stirred or Circulating bath should always be covered with a SL Lid or BP0368 Polypropylene spheres at all times reducing upto 70% of the heat, from ambient room temperatures, transferring into the bath being cooled. By doubling this layer of polypropylene spheres or using a SL4 Lid and spheres improves this further upto 90%.

7. DO Not use with Unstirred water baths otherwise the cooling coil will freeze solid and cooling performance lost.

8. Keep out of direct sunlight, away from high ambient temperatures or direct heat sources.

9. Do not place it where there are corrosive fumes, excessive moisture or excessively dusty areas.

1. This DC2-300 Immersion Cooler, offers increased cooling capacity.
2. Has an operating range from ambient to -20°C and its additional operating performance is particularly beneficial at these lower liquid temperatures especially in elevated ambient temperatures or larger volume stirred or circulating water baths.
3. Features a flexible 900mm long stainless steel pipe with a protective outer shield, exiting from top of the unit, making the stainless steel cooling coil naturally stand in the corner of any Clifton stirred or circulating water bath. This maximises the working area within the bath and reduces the chance of ‘cold shock’, the opportunity of the freezing cold coil accidentally intruding or touching and spoiling work.
4. The DC2-300 replaces wasteful use of cold water-cooling.
5. High efficiency condensers allowing operation in higher ambient temperatures.
6. Uses HFC refrigerant - R134a.
7. Single low noise level fan.
8. The unit is fitted with casters, which can be locked when sited, for easy mobility.
9. Completes a 100% leak and performance tests before leaving the factory here at Nickel-Electro. The performance test is conducted over 2 days, starting with an initial gas fill and cool down test with a NE4-8D Stirred water bath recording and verifying the time taken to reach 0°C, -15°C and -20°C ensuring it achieves specification. Repeated the next day.
10. Each unit is uniquely identified with its own serial number recorded on our product database, which includes all of its manufacturing inspection data. Electrically tested for safety at final inspection and a test certificate enclosed in rear of the instruction book.
11. Powder painted body providing a durable finish and protection against corrosion and now featuring “active anti-bacterial technology”. This paint finish actively inhibits bacterial growth improving hygiene requirements as demanded by many clinical and laboratory environments. Hygienic coatings are part of a controlled approach to cleaner facilities. The Clifton range has always featured easy to wipe clean smooth paint finishes that are resistant to routine and efficient disinfection’s, however this improved coating featuring ‘active anti-bacterial’ properties provides an extra layer of defence. This new anti-bacterial paint finish is effective against major strains of bacterium including E-coli and Staphylococcus aureus, resistant strain. Within its formulation an active ingredient is a proven anti-bacterial agent bound into the coating during application and curing to the product. The efficacy of the paint finish applied to the Clifton range is maintained over time, as the anti-bacterial agent is integral within the paint finish.