0
pH - mV - rH2 - Conductivity - Resistivity - Salinity - TDS - Temperature
C3050 - C3051
- rH2: 0...42 rH2
- pH: -2...+16 pH
- mV: ±2000 mV
- Conductivity: 0...2000 mS/cm
- Resistivity: 0...200 MΩ.cm
- Salinity: 0.0...70.0
- TDS: 0...100 g/l
- μW: 0...400000 μW
- Temperature: -5...+105°C
Cena na vyžiadanie
0,00 €
S DPH
0,00 € bez DPH
rH2
- Bio-electronic multimeter for the study of the biological water quality or illnesses in body fluids according to Vincent's method.
pH
- Multi-point (1...5) calibration for more linearity.
- Selectable resolution from 0.001 pH to 0.1 pH.
- Automatic calibration with any of eleven pre-programmed and five user specified pH buffers. Create your own buffer/temperature tables!
- Accepts pH electrodes with any zero point (Eo) between ±999 mV.
mV
- Features mV calibration for accurate ORP measurements.
- Selectable resolution from 0.1 mV to 1 mV.
- Can also show mV referred to the standard hydrogen electrode.
Conductivity
- Multi-point (1...3) calibration for more linearity.
- An electrode with a typical cell constant of 1 cm-1 (standard) permits to measure from 0.01 μS/cm to 200 mS/cm in five ranges.
- An electrode with a typical cell constant of 0.1 cm-1 permits to measure from 0.001 μS/cm to 20 mS/cm in five ranges.
- An electrode with a typical cell constant of 10 cm-1 permits to measure from 0.1 μS/cm to 2000 mS/cm in five ranges.
- Automatically selects correct range and frequency.
- Selectable reference temperature: 20° or 25°C.
- Automatic calibration with any of three preprogrammed and three user specified standard solutions. Create your own standard/temperature tables!
- Accurate low conductivity measurements by eliminating the capacitive component of the electrode and its cable (avoid the use of long cables!).
μW
- Calculates the resistance (Ω) and the quantification of Vincent (μW).
Temperature
- Manual or automatic temperature compensation.
- Calibrates temperature probe for quality measurements.
Inputs
- Two inputs for pH, mV or conductivity + corresponding temperature and reference inputs.
- One extra input for pH or mV + corresponding temperature and reference input.
- Low voltage DC input for e.g. a mains adaptor.
Outputs - Two versions available:
- C3050: with USB communication port and RS232 interface.
- C3051: with Ethernet communication port and RS232 interface.
Data-logging
- Up to 12000 data sets can be stored manually or at a programmable interval.
- Allows to mix data from all ranges in the same table.
- Freely downloadable data acquisition software enables to view, store and edit the measurements in your computer.
Cabinet
- Robust dust and splash-proof cabinet.
- An optional wall mounting kit allows to fix the meter to any wall making more space available on the desk.
Display
- A large bright LCD screen with white backlight enables to view all channels individually or simultaneously.
- Stability indicator prompts the user when readings should be taken.
- Hold function allows to freeze the display for convenient reading or recording.
- The interactive LCD screen provides step by step instructions in the language of your choice (English, Dutch, French, German).
- Real-time clock displays time and date.
- Shows a GLP report on the LCD screen.
Special features
- Two-way communication with a computer using USB or RS232.
- Can be programmed to continue automatically with the measurements or data-logging after a power failure.
- Password protection prevents any unauthorised modification of the instrument's settings.
- No electrical interference between pH/ORP and conductivity electrodes in the same solution.
- Optional 12 V car adaptor.
- Three year warranty.
GLP
- All procedures for a "Good Laboratory Practice" are on board.
Pre-programmed standards
- pH buffers: 1.68, 2.00, 4.00, 4.01, 6.87, 7.00, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C).
- Conductivity: 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C).
CODE | DESCRIPTION |
C3050 | Meter only (USB version) + USB cable + mains adaptor |
C3051 | Meter only (Ethernet version) + mains adaptor |
C3050T | Meter kit complete: C3050 + pH/ORP electrode SP30B + conductivity electrode SK20T+ 3x50 ml buffers (pH 4, 7 and 10) + 50 ml conductivity standard (0.01 M KCl) + 50 ml electrolyte (3M KCl) + flexible electrode holder SH300 |
A4800 | Wall mounting kit (optional) |
A4049 | Car adaptor, 12 V (optional) |