pH - mV - Conductivity - Resistivity - Salinity - TDS - Temperature

pH

• Mulit-point (1...5) calibration for more linearity.
• Selectable reslution from 0.001 pH to 0.1 pH.
• Automatic calibration with any of eleven pre-programmed and five user specified pH buffers.
  Create your own buffer/temperature tables!
• Accepts mV electrodes with any zero point(Eo) between ±999mV.

mV

• Features mV calibration for accurate ORP measurements
• Selectable resolution from 0.1 mV to 1 mV

Ion

• Direct concentration measurement.
• Multi-point (2...5) calibration and an additional blank correction for measuring low concentrations.

Conductivity

• Multi-point (1...3) calibration for more linearity.
• An electrode with a typical cell constant of 1 cm^-1(standard) permits to measure from 0.01 µS/cm to 200 mS/cm in five ranges.
• An electrode with a typical cell constant of 0.1 cm^-1  permits to measure from 0.001µS/cm to 20 mS/cm in five ranges.
• An electrode with a typical cell constant of 10 cm^-1 permits to measure from 0.1µS/cm to 2000 mS/cm in five ranges.
• Automaticly selects correct range and frequency.
• Selectable reference temperature: 20°C or 25°C     
• Automatic calibration with any of three preprogrammed and three user specified standard solutions.
  Create your own buffer/temperature tables!
• Allows to lock the initial conductivity range to avoid non-linear titration curves.
• Accurate low conductivity measurements by eliminating the capacitve component of the electrode and its cable (avoid the use of long cables!).

Dissolved oxygen

• Operates with a galvanic dissolved oxygen electrode requiring no polarisation time and no zero calibration.
• Selectable resolution from 0.01 mg/l (0.1%) to 0.1 mg/l (1%)
• Manuel salinity compensation 0-40
• Automatic air pressure compensation 600-1300 hPa.

Temperature

• Reads temperatures with 0.1 °C resolution.
• Manuel or automatic temperature compensation .
• Calibrates temperature probe for quality measurements.

Display

• A large bright LCD screen for a better readability.
• A white backlight automatically illuminates when operated on the mains
• Stability indicator prompts the user when readings should be taken.
• Hold function allows to freeze the display for convenient reading or recording.
• The interactive LCD screen provides step by step instructions in the language of your choice (English, Dutch, French, German)
• Real-time clock displays time and date.
• Shows a GLP report on the LCD screen.

Inputs

• One common input for all ranges + corresponding reference input
• One input for a Pt1000 automatic temperature.
• Low voltage DC input for e.g. a mains adaptor.

Outputs

• Galvanically issolated USB communication port for connection to a computer.

Data-logging

• Up to 12000 data sets can be stored manually or at a programmable interval.
• Allows to mix data  from all ranges in the same table.
• Freely downloadable data acquisition software enables to view, store and edit the measurements in your computer.

Cabinet

• Robust dust and splash-proof cabinet.

Special features

• Calibration reminder 0...999 h.
• Programmable recorder output
• Programmable identification number for use with a printer or computer.
• Password protection prevents any unauthorised modificaton of the instruments' settngs.
• 2 way communication with a printer or computer using USB
• Mains and rechargeable battery operation with programmable automatic switch-off.
• Shows percentage of remaining battey capacity.
• Optional 12 V adaptor.
• Three year warranty.

GLP

• All procedures for a "Good Laboratory Practice" are on board.

Pre-programmed standards

• pH buffers: 1.68, 2.00, 4.00, 4.01, 6.87, 7.00, 9.18, 9.21, 10.01, 12.00, 12.45 (at 25°C)
• Conductivity: 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm (at 25°C).